Description:
Gage Tech(TM) is a measurement system validation tool that calculates Gage Repeatability and Reproducibility (Gage R&R) for ISO9000, QS9000, and other quality systems. This program follows the recommended analysis by the AIAG group, using the Xbar and R (average and range) statistical method.

This version of Gage Tech is geared to the engineer and/or single user of the program. All data is stored on the individual''s device and is backed up on the PC during HotSync®.

The advantage of Gage Tech over common PC programs is the portability of your Palm handheld device. With the program you can enter your data using standard methods and get a good feel for the results RIGHT ON LOCATION. It performs the calculations, excuding out-of-limit data automatically, and provides numerical and graphical data so that you know immediately if your measurement setup will work. Using the program, you can run your trials, find problems with your setup, tweak the setup, and run the trials again. It saves costly setup time and money because you do not have to return to your PC every time to verify your results.

Features:
* Standard Gage R&R analysis as recommended by the AIAG group.
* Supports up to three operators, three trials, and ten parts per data set.
* Stores data for up to 50 gages each with up to 100 data sets.
* Automatic exclusion of insufficient and out-of-limit data.
* Up to 5 decimal places of accuracy.
* Unique status display matrix of all data on one screen helps evaluate and improve the quality of data collected.
* Displays intermediate results once the minimum data has been collected.
* Real-time calculation of reports and graphs.
* Color or monochrome Xbar and R Charts.
* Auto-ranging, auto-scaling charts zoom in on graph details.
* Ergonomically designed:
-- Tabbed windows for greater ease of use.
-- Buttons for quickly cycling through data when collecting or inspecting data.
-- Data entry close to graffiti area for minimum stylus movement.
-- Fingertip operation of pushbuttons.
-- Numbers displayed in large font for easier reading.
-- High-contrast charts for easier viewing in suboptimal conditions.
* Co-designed by a Quality Manager.
* Automatic backup of data during HotSync® operation.
* A Palm Powered Solution(TM)

Applications/Examples:
* Standard Gage R&R studies.
* On-the-spot validation of setups and procedures.
* ISO 9000
* QS 9000
* General measurement system validation.

Supported Platforms:
Gage Tech(TM) is a Palm Powered Solution(TM) that requires PalmOS® 2.0 or greater and a minimum of 256k RAM.
Palm OS 5 (Garnet) and Cobalt compatible.
Support for both monochrome and color devices.

Technical details:
Gage Tech(TM) processes data using the industry standard method known as Xbar and R (average and range) method. The program allows for the standard ten samples, three operators, and three trials per operator, and can store up to 50 gages each containing up to 100 data sets.

Per standard methods, Gage Tech automatically excludes out-of-limit data in the calculations. It also performs the calculations only when the minimum requirements for the study are met, preventing the user from performing an inaccurate and misleading study. Minimum requirements are data for two operators, two trials, and two parts.

Calculations are performed in real time. After the minimum data has been collected, intermediate results can be displayed, both numerically and graphically.

Gage Tech(TM) includes 5 tabs to move quickly between set up, data entry, data check, reports, and charts.

Tab 1: Setup
Easy set up input of the description.
* Gage name
* Data set
* Data name
* Names of operators
Drop down menu to select previous gages and data sets.

Tab 2: Data Entry
Easy entry of data
* Tap on choice of Operator, Trial and Part or Cycle through the data with fingertip arrow buttons.
* Use arrow buttons for data entry or quick review of entries.
* Data entry close to graffiti area for minimum stylus movement.

Tab 3: Data Check
Easy review of status of data in matrix format:
* Data OK (check)
* Excluded Data (X)
* Range exceeds LCL (-)
* Range exceeds UCL (+)
* No data (?)
Tapping a symbol in the matrix will switch to the Data Entry tab with appropriate data preselected.

Tab 4: Report
Quick view of standard data calculations:
* Equipment Variation (EV)
* Appraiser Variation (AV)
* Repeatability & Reproducibility Variation (R&R)
* Part Variation (PV)
* Total Variation (TV)
* Upper Control Limit (UCL)
* Lower Control Limit (LCL)

Tab 5: Charts
Quick view of two common charts:
* Average (Xbar)
* Range (R)
* Toggle easily between the two charts.
* One tap displays a pop-up legend.
* Auto scaling and auto ranging of axis.
* Zooms in for optimum view of data.